Hi,
In service provider real world, what is the ASN range (Public or Private) used in case of using BGP as PE-CE protocol (for both CE managed service or unmanaged) ? knowing that in our MPLS core we already run Public ASN for L3VPN route exchang...
Hi All,
please i need a help to choose the right devices for the attached Design, we will deliver the below services over this Backbone.
- Internet access
- EOMPLS
- H-VPLS
the condidate devices are :
Asr 9006 for Core/GW internetCatalyst 6880-x fo...
Hi,
we have a CISCO7606-S with WS-SUP720-3B , recently when the traffic increased to 400 Mbps we are experiencing a cyclique reboot every 20 minutes.
when we reduce a traffic everything goes normal.
please help to diagnotic this issue.
attached...
Hi,
Plz help to configure the Qos (3 classes Real time, Critical & Best effort, based on COS client marking or DSCP) for the below scenario, THE PE's are C7606S :
WS-X6748-GE-TX ==> Clients facing module
Sip 400 ==> Core facing Module
sh module ...
Dear All,Plz i need a support regarding the Qot1q-in-dot1q interoperability with 802.1ad, for that i attached a real lab test topology.topology description : - QinQ-Customer connect to the Core network via Wireless solution (CPE in customer Site a...
Great !!! thank you Adam.
At the first stage we will start without Hw redundancy at PE's/ region and Pre-aggregation level, the idea behind that is the TCO / 5 - 7 years.
can you plz clarify for me the below points :
Some of the VPN's will be t...