Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
I'm configuring a network to run with a dual hub dual cloud DMVPN solution. I am running OSPF over the two clouds.
While doing some resiliency testing I noticed that if the physical interface of one of the hubs connecting it to the WAN is ...
Hi All,
I'm configuring a network to run with a dual hub dual cloud DMVPN solution. I am running OSPF over the two clouds.
While doing some resiliency testing I noticed that if the physical interface of one of the hubs connecting it to the WAN is ...
Hi again, I'm looking at pruning some of our VLAN traffic across the network. We have a large number of VLANs in our VTP domain and it just makes sense to prune them out. I have a couple of questions that I'm struggling to find answers for.1) VTP Pru...
Hi, I've just started working for a new company and while I was getting to grips with their set up I have discovered that our core layer 3 switches, 2 pairs of 4500 switches, are using VLAN 1 for the majority of our servers.I wish to migrate the addr...
Hi guys,I am putting in a kron function to transfer the command output from all the switches and routers on our network to a tftp server.I have the kron occurence and policy lists set up the way I want them and have tested the redirection of the comm...
Hi Paul, Thanks for your help. The management VLAN is 254. Should I just migrate this to an ineligible VLAN number and then implement pruning? Cheers,Liam
I told them that the downtime would be minimal so they relented and let me go ahead, in the end the bank system was only off for less than a minute, long enough for the monitor to notice it had dropped off but the processing server itself was oblivio...
Hi Ken,I basically want to move the SVI to become primary on VLAN 2 and get rid of the config on VLAN 1.I just wanted to check if I could implement the HSRP config on VLAN 2 before removing it from VLAN 1 to minimise the perceived downtime.What you a...
