We can influence the inbound routes using BGP community attribute as well other than AS-Path & MED . This method, however requires additional configuration on the provider’s side. The ISP needs to configure its PE routers to match different BGP commu...
@Sergey LisitsinThe following error indicates that during the execution of ios_command module an unsupported parameter 'command' was found. Do check the Ansible document [1] for the support parameters in the ios_command module. ------------------...
OSPF uses the SPF algorithm , since inter-area OSPF is distance vector, it is vulnerable to routing loops. It avoids loops by manipulating a loop-free topology, in which traffic from one area can only reach another area through area 0.
Hi Guys,I have the solution to this problem.The reason why we get the message "LACP currently no enabled on the remote port " is because LACP is not enabled on the member ports.While creating the Port channel the members are not in the switch port mo...
