Hi all i have a bunch of CP-3905 registered on a CME 10. these phones randomly appear to stop working, i mean: SIP signaling seems to work correctly (the phones ring if called and it is possibile to make calls..) but there's no audio either way.... i...
Hi AllI have a VPN Concentrator 3020 in my structure and i'm configuring IP address assignment by an external DHCP Server.there is no problem in that: the client authenticates and then receives its IP address..the problem is that i need to configure ...
Hi Allwe have a UCM 5.1 with this situations:we have a single PSTN phone number pointing at a Hunt Pilot with some DN under iti'm asked to do this: at least one user in the line group should be able to enable and disable the transfert of hunt pilot i...
Hi!we have installed LMS 3.0.1 for Windows with Campus Manager 5.0.2when we try to launch topology services from the Campus Manager Home page ( http://srv:1741/campus/topoServices.do) and from the LMS Homepage (http://srv:1741/campus/topoServices.js...
Hi Antonisi'm sorry for the delay.i'm not really sure of this, so i can only interpret the situation from the overall behaviour of the phones: this way it seems that the web interface is somehow not correct, while it is the command line output (so th...
Hi Antonisthe solution for me was much simplier than i expected: the output the phone web page was wrong: they were just running Cisco-CP3905/9.2.1 (the bugged version).so i just had to upload 9.4.1 firmware on the tftp and force them to use it.
finally we got it:the point is CP-7962 needs "Skinny Client Control Protocol (SCCP) Software 8.3(5) and later "... on all our CP-7962 the SCCP soft. was SCCP42.8-3-2S.. i thought that installing the latest device-package would automatically resolve t...
Hi Java thanks for your answer... btw i already rebooted the CM after the DevPack installation, but nothing has changed: in the "device defaults" page the device is still "protocol unspecified", and the expansion is still not working..i tried to ...
