Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi2960 needs reachability to backbone-sw when link between 2960 and 4509 is down4509 is the server, All 2960 will be VTP clientOn 4509interface gi 0/1switchport trunk encap dot1qswitchport mode trunkinterface gi 0/2switchport trunk encap dot1qswitchp...
HiOn a Remote Site When a switch or hub are connected to switchport, the port needs to be disabled. What configuration is needed on the switch.The switch is 2960.
Hineed config help for site to site VPN. HeadOffice with Pix 515 with static public IP and Two branchOffice with dynamic Public IP. Branch office are equiped with 877 routerAppreicate help
Hiwhat steps are needed to protect Internet Routers from DDOS attack,ip address is changing everytime, so ACL is not helpful.Setup Internet_rtr----------------LoadBalancer-------------------Firewall----------LAN------Server### On ASA Error ##########...
Hi25 roaming users needs to connect to the network and access application.It can be 25 concurrent or max 25 connections. It needs to be secured and authentication through ACS integration.Will 2811 fullfill the requirement. Do I need any additional Li...
HiDo I need additional configuration on 4509 for RSTP then mentioned.Is any config needed on 2960 edge switches for RSTPSwitch(config)# spanning-tree mst configuration
Switch(config-mst)# instance 1 vlan 10-20
Switch(config-mst)# name region1
Switch(...
thank you for replying Mr. GiuseppeCan you input with best practise for (#) in the folllowing lines, I dont have any experience to put numbers.If you got any recommendtion do inputaccess-list 101 permit tcy any 10.10.10.16 0.0.0.255ip tcp intercept l...
