I configured the NetFlow and am sending the NetFlow to Cribl but cribl is rejecting the netflow mentioning that Data Template interval is 0 Seconds and Leaf exporter settings are saying the same:show flow exporterFlow exporter HNT: Destination: 17...
I have a BD which has two subnets. The BD is mapped to Two EPGs each mapped to different subnets. I am configuring a DHCP relay that provides an IP Address from the primary subnet even if the host is connected to second EPG with a non-primary subnet ...
Hi Guys,
I have 2 x L2OUTs created between Cisco ACI and Cisco 6509 switches. The topology is like below
Cisco ACI Fabric---Leaf 1 & 2 ------ Classical Ethernet Switch 01
---Leaf 3 & 4-------Classical Ethernet Switch02
...
I appreciate you helping me out. I am getting the following error:"Unable to process the query, result dataset is too big"Do you know workaround for this?
Thanks for the detailed answered; however for some reason, I am getting stuck when I entered the command:moquery -c fvRsPathAttIt does not return anything.Do I need to provide any DN as well. I would like to get the details for the whole fabric endpo...
If flood in Encapsulation is disabled and BD has two subnets and Endpoints in 2 EPGs belong to different subnet. Will they receive broadcast of other network?
