Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I know that there are 3 types of Syslog configiurations to enable logging in AP and WLC for Syslog server 1) Controller Syslog 2) AP Syslog3) Client State Change Syslog What information are contained in the Syslog messages (Controller Syslog) w...
Hi, we want to change the minimum TLS version on the DNAC from 1.1 to 1.2, which impact would this change would have on the network? what do need to be aware of before changing the TLS version? Regards,OJ
Hi I want to configure WLC 9800 to send Syslog messages to an external Syslog server. In the configuration I can only see the configurations for the IP address and vrf, how about the protocol and port number? what does the WLC uses? UDP 514? Regard...
Hi On DNAC's CLI I was trying to generate the rca files on the DNAC nodes, yet couldn't, because the admin username was refering to my colleague's username, he generated AURA reports earlier today and I am guessing thats why the rca process is showin...
Hi, We have provisoned a new RF profile on DNAC, the provisioning and deployment seems to be successful on the DNAC, however on the WLC we can't see the newly created/provisioned profile, any idea why is this issue occuring? DNAC version is 2.2.2.3WL...
I found the following info:https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/message/guide/sysmsg80/overview.html they mention clrealy here the message types, however its for the old WLC, is it similar to WLC 9800 IOS XE 17.X ? Regards,OJ
I am aware of this document, it mentions only how to configure the Syslog for AP and WLC, but does not mention what type of logs generated. The Client state syslogging is quite clear cause they've provided some outputs. Regards,OJ
Since the WLC is connected to the DNAC, is it possible to configure l"oggin host <IP Address> transport tls port <PortNumber>" through the DNAC or the only possible way is the WLC's CLI? Regards,OJ
