Hi community,I have a WAP581-A-K9 V01, a few days ago it stopped working (after a power outage). Connect a PC directly to the ETH port of the WAP581 and accessed through the IP 192.168.1.1, requesting to perform a firmware recovery I tried to load al...
Hi Nikola,In my case I have a wap 581, I have tried all the firmwares for the cisco WAP 581 but it has not workedFirmwares: https://software.cisco.com/download/home/286314835/type/282463166/release/1.0.5.0?i=!pp My case info: https://community.cisco....
No, I need request power dBm by snmp,The command is:RP/0/RP0/CPU0:CRSX-XX-2#show controllers Te0/2/0/7 phy | include dBmSat May 2 23:53:24.889 argTx power: 0.6068 mW ( -2.2 dBm)Rx power: 0.1367 mW ( -8.6 dBm) RP/0/RP0/CPU0:CRSX-XX-2#show verSat May 2...
