Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am attempting to setup and test a Cisco Meeting Server CMS. I am having a problem trying to get into the web interface, which is continuously showing "Reconnecting". I have tried both versions 2.0.3 and 2.0.7. The install and initial configuratio...
I agree with you, Patrick, connecting to the network and web interface will work, and the EX series are not EOS/EOL, I have heard they will be around for a little while longer. Given the choice, personally I would rather have the EX90 as it is capab...
Hi Patrick,
Thank you for your post. Yes earlier I was using port 443, but then at Jaime's suggestion, and at a recommendation I read, I changed the port from 443 to port 445. However, I am still getting the "Reconnecting" message. Do you have an...
Thanks again,
Yes I am using a Cisco OVA, and its not modified. The url that I am using is the IP address with the port number:
https://192.168.15.210:445/
These last attempts for this support forum question, was done using Cisco CMS 2.0.3. I am ...
You should be able to get an IP address from the Menu of the DX80.
Alternatively, if your Collaboration Endpoints are getting IP addresses via DHCP, which is default, then, you can get the IP address of the DX80 via the DHCP server.
The DHCP address...
