Either in Windows or Mac
Below is Partial jabber-config.xml
webserver is substituted for the actual webserver url.
Manually I can access update.xml through a browser using the link in the jabber-config.xml
I can also download the jabb...
Ping 220.127.116.11 from 3925 works fine.
Ping 18.104.22.168 from laptop (172.16.0.10) connected to 3560 does not work.
Ping the gw @172.16.0.1 from the laptop works fine.
CO-Router1#traceroute ip 22.214.171.124
Type escape sequence to abort.
Tracing the route to googl...
Dialing a URI such as email@example.com from a Jabber 11.6 client via CUCM 10.5.2, Expressway C/E 8.7.3 does not interwork.
The search shows SIP only, and never has a 2nd search for H.323.
Interworking is "On" on both Core and Edge.
I would like to test CUCM calls remotely.
No VPN access, only remote desktop or VM Console.
CIPC does not work on remote desktop because it needs audio drivers.
X-Lite will not install as it wants a local drive.
Other ideas?Thank you
I have found the python script that imports links from a csv or xml file.However, I have not found the format that those files should be in. Can someone point me the right direction?Also, is there an example of adding/deleting a link with using a fi...
For those of you that might of experienced this issue, I found that case is very important.
This is what I had in jabber-config.xml
This is what actually worked in jabber-config.xml
Thank you. I enabled ip routing on the 3925.
That was certainly half the answer. I can now ping 192.168.0.1(ASA gw) from the laptop on 172.16.0.10.
However, I cannot ping 126.96.36.199. Here is some additional debug info.