About dkuppe01Harris

dkuppe01Harris · 01-26-2017

I am attempting to setup and test a Cisco Meeting Server CMS. I am having a problem trying to get into the web interface, which is continuously showing "Reconnecting". I have tried both versions 2.0.3 and 2.0.7. The install and initial configuratio...

dkuppe01Harris · 01-27-2017

I agree with you, Patrick, connecting to the network and web interface will work, and the EX series are not EOS/EOL, I have heard they will be around for a little while longer. Given the choice, personally I would rather have the EX90 as it is capab...

dkuppe01Harris · 01-27-2017

Hi Patrick, Thank you for your post. Yes earlier I was using port 443, but then at Jaime's suggestion, and at a recommendation I read, I changed the port from 443 to port 445. However, I am still getting the "Reconnecting" message. Do you have an...

dkuppe01Harris · 01-27-2017

Jaime, Thank you, I will give it a try later today, and let you know. Thanks again

dkuppe01Harris · 01-26-2017

Thanks again, Yes I am using a Cisco OVA, and its not modified. The url that I am using is the IP address with the port number: https://192.168.15.210:445/ These last attempts for this support forum question, was done using Cisco CMS 2.0.3. I am ...

dkuppe01Harris · 01-26-2017

You should be able to get an IP address from the Menu of the DX80. Alternatively, if your Collaboration Endpoints are getting IP addresses via DHCP, which is default, then, you can get the IP address of the DX80 via the DHCP server. The DHCP address...

Member Since	‎09-08-2015 07:33 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	12
Total Helpful Votes Received	10

User Statistics

User Activity

Cisco Meeting Server CMS web interface continuously showing "Reconnecting"

I agree with you, Patrick,

Hi Patrick,

Jaime,

Thanks again,

You should be able to get an