Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a S2S VPN tunnel to Azure from my 2130 FTD that works, passes traffic and is fairly stable, however, I have recently started to see the above message on the FTP logs. All of the networks identified in the error can access Azure networks so I a...
I have a very sporadic issue with my Contact Center. Randomly, when a user calls in they hit out main number. When they press the number for the service they want the call is dropped immediately. If they call back they are entered into the correct qu...
My current LDAP is set to pull every new user into CUCM. When the system was setup (prior to me) this wasn't an issue because the company was smaller and used less service accounts. Now, however, we are larger and use many service accounts that are s...
I recently upgraded my cluster from 11.5 to 12.5 and have encountered several issues. I have been working through each one and have one that I have not been able to resolve. I get a message every few min that:Service operational status is DOWN.SNMP M...
I am running 11.5 and recently without any changes in our environment the Subscriber is spitting out the following error every 2 min:Primary node NTP server, cuc-pub, is currently inaccessible or down. Verify the network between the primary and secon...
I added the /24 address space on the Azure side for the 10.12.X.X addresses. The curious thing is in Azure I use /16 for 3 address spaces but on the FTD I use /24 for 6 specific networks. Of the 6 there are 2 in the 10.12.X.X/16 space and they are th...
In Azure I have 10.10.0.0/16, 10.12.0.0/16 and 10.8.0.0/16 as remote address spaces. These address spaces are part of the tunnel but I am more specific on the FTD side. I have only allowed 10.10.1.X/24, 10.10.254.X/24, 10.8.8.X/24 and 10.12.12.X/24. ...
