Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My customer has a MC3810, which had a 6-DSP(slot5) Voice Compression Module, which was replaced off late. Previously in the "sh version", the followinh was show:"1 6-DSP(slot5) Voice Compression Module(v01.K0)" but after the new module was installed...
How are ICMP packets processed on these platforms ? Are ICMP packets by default cef switched on a 7200, or is it that the first packet is process switched and the following set of icmp packets to the same destination are cef ?And does it work the sam...
My customer has a C3640 with IOS 12.1(5)T9, Is it possible to configure Class based Queuing on a IPSec tunnel(ESP mode) using this IOS, if this is not possible would it be possible to configure a Priority Queuing on a IPSec tunnel. Or do i need to up...
In the below given netwrok scenario, how would osfp work ?Would it consider the L2 trunk between Switch B and Switch C when calculating the cost to router D?so is the ospf cost from S/w A => S/w B =>Router D = 20 and S/w A =>S/w C=>S/w => RouterD =2...
Hi Dave,Thanks for you explanation.Could you please let me know how you simulated and verified the same, i would have to present the same to my cu.regards,mahe
On second thoughts, i am to understand that the cat1924 contains a tftp listener [Menu- (F)FIRMWARE->(A)ACCEPT UPGRADE TRANSFER FROM OTHER HOSTS]i did try a tftp download from a Win2k machine but it gives an error,****C:\>tftp -i 192.168.108.143 get ...
If you have migrated from the CatOS to native IOS(thats what i think you have done), there is no concept of moving between switch and router mode, all configurations are done from the same mode.
Are you refering to the Java plugins required for configuring these switches using the CSM ?This would need to be downloaded on the machine which you would use to configure the switch.If this is what you are looking for download the same from this UR...
Hi there,Thanks for the quick response,Could youplease let me know if this connection Id is alloted sequentially,or is it that it allots any random number ?mahe