Hello all,
Would love your input for the pros and cons of traffic flow (TCP sessions, load balancing of destination routes, etc) of 2 scenarios that we are deciding to implement.
Scenario A has 4 x 40Gbps links in each chassis going to a DC respe...
Is it possible to Link-bundle the 100G cards (links found below) on the ASR? I was able to find that they can do this for 1G and 10G, but couldn't find that on the 100G. Would it be similar to the etherchannel feature on Catalyst / Port-channel featu...
Hello everyone,
I'm in the middle of a design and was curious to find out what are everyone's thoughts about Nexus Chassis in the Campus. I'm asking this due to the fact that our building layouts have about 500 Switch stack uplink connections that ...
Although I'd love to share that, this project is in the green field stage. Construction is being implemented and systems aren't in place yet. At this particular juncture, we are projecting networking devices in place based on quantities of data, vide...
Upstream from the ASRs are the MPLS mesh of 4 of ASRs (2 located in each data center). These would be the P routers
I'm designing something for the aviation industry, so the portion where it goes from Access Switch stack - Nexus - ASR is an example...
Thanks for your reply
Perhaps this visual can help. I wanted to see if it was possible to add more links between the ASRs and the Nexus and bundle them together. So its up to 16 ports that I can do this with the M3 100G line cards?
Oversubscript...
