Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone
Quick question
Can the 8800 IP phones series phones mask the DTMF tones made by pressing a number button in speakerphone mode? (e.g. while navigating on IVR menus and when dialing FACs). This is desired for security reasons.
Thanks ...
Hi Juan,This link will show you how to configure L2L tunnels and vpn client on the same firewall.http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094cea.shtmlThis sample config uses a TACACS server to authentica...
Hi Raj,If you need a software image that isn't available online you'll need to open a case with the TAC.They have all the concentrator images that have been available at the website.Hope this helps.
Hi Ramesh,Good evening.To enroll a PIX with a CA server you must obtain:1.- A Root certificate (sometimes called CA certificate)2.- An ID certificate.To get the root cert we must authenticate with the CA server.Three commands are needed:ca identity ....
Hi Shane,Good afternoon. If the Windows Login works while using an static IP but not with a PPPoE address we could be facing a MTU problem.PPPoE adds and extra header to each packet, so just imagine the header size for each VPN packet with the pppoe ...
Hi, you can terminate the tunnel on the same interface that has the crypto map enabled.It is called a one-armed configuration.You can attach apply the crypto map to the LAN interface (in this case the only interface)The crypto map should always be ap...
