Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a LAN with a very basic setup (one switch and one router) with no local DNS server (I use 8.8.8.8 as server).I recently started hosting a website so I have 2 NAT rules: 1. A NAT overload rule allowing my local PCs to access the Internet2. A...
Hi, I'm facing a challenge to have an SSL VPN client access internal resources (172.23.26.0/23 subnet) and hope somebody can assist me with this.1. Client connects without any problem to the ASA using Anyconnect with authentication happening over Rad...
Hi Paul,Thanks for your reply.The Second option seemed weird to me and I could not fully understand it. So I went for the first solution (NVI nat style).I removed all nat command referencing the "NAT Domain" and added the below commands. Everything w...
Hi Omz,Thanks for the reply. Yes, I want to be able to access using FQDN from local PCs.I know it's possible to alter DNS/host files but we'll have to set the port in the URL since the web server does not use standard http port ... What I need is som...
Hi all and thanks for your help. After digging a little bit, turns out my problem is not related to the configuration. It's a design problem (was supposed to be a temporary solution). I'm still very interested to know how to fix it so I've attached a...
Hi,Thanks for your reply.The ACL is not pushed to users (I did not even know it was possible).I have removed all access lists as they were just for testing purpose.I'm still unable to access internal resources.
