Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have installed dc agent(with logon agent) in both DC(websense enterprise with reporter5.5 is installed in one of the DC),but in the websense reporter,I can see two groups,one is user in not any groups(all of these are ip address),another is DC user...
how can I user win2k's user in acs 3.0x? when I use acs 3.01 for win2k to do 802.1x+ port authentication,I just can use acs's user,but not win2k's user,I have maped the win2k group to acs's group,but the failed attampls log tell me:"auth type not sup...
ip access-list extended admin permit tcp 192.168.0.0 0.0.255.255 any reflect hr permit udp 192.168.0.0 0.0.255.255 any reflect hr permit ip any any permit icmp any anyip access-list extended testevaluate adminthen there is an error£ºaccess-list type ...
realize the dynamic vlan(based one username&password),6509's ios is CATOS 7.3,I have searched in cisco.com,but I only find how to do port authen in 6509 with 802.1x,
I found that sometime I can log in with 802.1x,but sometime can't,after my first login successfully,I unplued the cable and plug it into another vlan(at the same time,I change the ip address),in xp,the local connection seems"authenticating",but it do...
my catos is 7.31,I have these commands in it:set interface sc0 2 192.168.1.2 255.255.255.0set radius server 192.168.1.11set radius key cisco123set dot1x system-auth-control enableset port dot1x 3/26 port-control autothen I can ping 192.168.1.11,but a...
and could u tell me how to config the acs?how to config the relationship between username & vlan name?should I config the usersetup or groupsetup?how can I setup the NT user into ACS GROUP?I install ACS3 in a WIN2K DC
could u tell me how to config the 802.1x port on 6509?should config the port as dynamic vlan(set port membership x/x dynamic)such as vmps config?or I config nothing to the 802.1x port?anything else can help me£¨espesially about he ACS )?
thank u first!but the second problem,maybe u misunderstand,I mean the pix doesnot have a real public ip address,a router is outside the pix which has real public address,and use NAT in the router,which translate the pix's outside ip address(which is ...
