Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
On the platform 9010, we are using nested policers in this fashion:
Parent policer
policy-map 100M_TEST
class class-default
service-policy TEST_GOLD_T6
police rate 100 mbps
child-conform-aware
conform-action transmit
exceed-action drop
e...
Hi I have integrated Cisco ASA5525 with RSA 2FA secureID. The authentication works fine from the Cisco ASA but it does not work from Cisco Anyconnect client. I am entering the passcode generated by the RSA. But it displays “awaiting for input” after...
Hello Guys I am trying to redistribute a static route from one CE device into OSPF on another CE device, but it seems to be redistributing all other static routes except for one. It does not seem to be advertised either. I have checked the associated...
Hello Community
I had a seemingly basic question. My customer is going to install a newly purchased ASR 9010 in their network in addition to upgrading the existing ones. The existing ones are running 3.9.2.
It is clear that the upgrade must be perf...
Hi Xander/Experts
I recently performed a turboboot from 3.9.2 to 5.1.3 on ASR9010.
The router has come up fine and it seems to be functioning normally, however, the following issue is causing great concern to me:
I receive a warning from wdsysmo...
