Cisco ASA5525 with RSA 2FA securID

[anursriv]

Hi 

I have integrated Cisco ASA5525 with RSA 2FA secureID. The authentication works fine from the Cisco ASA but it does not work from Cisco Anyconnect client. 

I am entering the passcode generated by the RSA. But it displays “awaiting for input” after entering the passcode.

I am not sure if I am doing anything wrong. Does anyone have any suggestions?

Thanks

[rvarelac]

Hi Anurag ,

You might want to enabled the following debugs on the ASA

* debug aaa common 255

and use the test command on the ASA.

test aaa authentication <server name> host <server ip> username xxxx password xxxx

and check the results.

Hope it helps

-Randy-