About sampson01

sampson01 · 01-03-2017

I have a L3 3750 that I am using for all vlan routing. I have this connected to a sonicwall and that is the default route. The primary vlan is able to connect to the internet without a problem, however none of the other vlan's are able to. I have ...

sampson01 · 11-18-2016

Strange situation, we woke up to 5 of our 1941 routers, all geographically spaced by about 100 miles, all at the rommon screen and the compact flash card empty. We already had routers on hand to replace these so we just had to speed up our replaceme...

sampson01 · 03-31-2015

Two nights ago I replaced my sonicwall with a cisco 2811. Everything was great, untill the next morning. Around 9:30am internet stopped. I was able to ping out by ip but not name. I logged on to the dns server and found that I could ping internal...

sampson01 · 01-04-2017

There was a nat policy that was nat'ing the specific vlan subnet to another subnet for vlan nat translation. I was mis-configured. Once I adjusted this it came up. Thanks!

sampson01 · 01-03-2017

Sonicwall is doing the NAT'ing. Not sure about the outbound traffic policy. I did not set one up, but was not aware I needed to. Any idea what this would look like?

sampson01 · 04-02-2015

Ok so I was wrong, it did drop again. I was connected via RDP so I assumed it was up. However I was not connected to the DC but rather another computer so although the DC lost its connection, I was still able to keep the RDP connection up to another...

sampson01 · 04-01-2015

Disregard, looks like I was able to fix this by creating a new virtual NIC on the dc through vmware. This gave it a new mac and looks like it has been working all day today.

Member Since	‎03-31-2015 08:43 PM
Date Last Visited	‎04-06-2018 12:27 AM
Posts	8

User Statistics

User Activity

Layer 3 vlan internet issues

Rommon on 5 routers

New router, one server unable to access outside.

There was a nat policy that

Sonicwall is doing the NAT

Ok so I was wrong, it did

Disregard, looks like I was