Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have bad port or cable on my ASA firewall.
So i want to swap the port to rule out port is not the issue.
so if i remove the config on the existing port then NAT and ACL associated with that interface will also be remove or not?
that port is my out...
Hello,
I have this firmware IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(12c)EW1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
on Cisco 4506
i want to upgrade to firmware that allow me to configure LACP.
Please suggest the IO...
I have EIGRP Configured
router eigrp 2247
network 10.0.0.0 0.0.0.255
also static route ip route 10.10.0.0 255.255.0.0 10.0.0.1
so if i do sh ip route 10.10.210.0 it is showing that it using EIGRP but it should use static route because static route...
I want to do inter vrf routing on WS-C3750X-24T-S Switch. It is capable of import export funtionalities or do i have to configure VRF Lite? if yes then can anyone provide good article to configure VRF Lite? Thanks in advance.
Let me Explain What I am trying to do
I have Firewall with 10.0.0.253 ----- Switch 10.0.0.239 ---- 10.0.0.1 Other Site
Right now if i do
sh ip route 10.10.210.0Routing entry for 10.10.210.0/24 Known via "eigrp 2247", distance 90, metric 402944, t...
