About satyrjosue

satyrjosue · 05-12-2015

Hi everybodyI have one problem: I configured two ports in FCoE Upñink ports on Cisco UCS Fabric InterConnect 6324, the ports that i configured are direct attach on Cisco MDS 9148 Switch on fc1/5 and fc1/6 interfaces but UCS manager show me the error ...

satyrjosue · 04-20-2015

HelloI have 1 Cisco UCS 5108 Chasis with 4 Cisco UCS B200M4 Blade servers, VIC 1340, adapter firmware version 4.0 (1c) and the UCS Manager firmware version 2.2 (3c)I have one service profile with 12 VNIC for each blade and I saw the following vmnic i...

satyrjosue · 04-01-2015

Hello everybodyI have the following architecture1 Cisco Catalyst 6509-E1 Cisco Catalyst 3560-x2 Fabric Interconnect 6296UP1 FAS 3220 (principal storage)1 FAS2240 (vault backup)1 chasis cisco UCS 51085 blade servers Cisco UCS B200M3Firmware version: 2...

satyrjosue · 04-21-2015

Walter,Thanks for your help, I'll try this option, but i don't need all vmnics for each ESX hostI don't create a vswitch yet, but i created a VCENTER and cluster of B200M4 bladesregards.

satyrjosue · 04-02-2015

Hi Marcin, thanks for your helpThe purpose of pointing to both NetApp devices was thinking in case of disaster, for example, if FAS3220 fail, FAS2240 is up with new LUNSI've read some Cisco articles and this case is impossible.

Member Since	‎04-01-2015 08:48 PM
Date Last Visited	‎06-20-2018 01:41 AM
Posts	7

User Statistics

User Activity

Direct attached Cisco UCS 6324 Fabric Interconnect to Cisco MDS 9148

Problems with VNIC recognition on ESX Hypervisor

FAS3220 and FAS2240 direct attach on fabric interconnect 6296UP

Walter,Thanks for your help,

Hi Marcin, thanks for your