About qus83

qus83 · 07-08-2024

Helloi have issue in targeted hello for non directly connected peer show mpls ldp discoveryTargeted Hellos:x.x.x.x-> x.x.x.x (active), xmitEstablished: N/A remote router x.x.x.x -> x.x.x.x (active/passive), xmit/recvLDP Id: x.x.x.x:0Hold time: 90 sec...

qus83 · 12-19-2023

HELLO ALLi have a packet loss issue in ISP domain from only one side in all PE routers which is CISCO NCS5K to ASR920 routers the issue only when pinging in NCS5K Type escape sequence to abort.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!...

qus83 · 12-06-2018

Hi I'm trying to access ASDM from internal interface in order to configure site to site vpn to build my configuration prior to shipping and before client's network become usable the problem is I cannot access ASDM https://10.10.10.1 is not working...

qus83 · 10-29-2018

Hi Everyone Sorry if I'm posting in wrong topic I have issue regarding to windows virtual server please find attached pictures for clarifying I made rules in FortiGate to allow server access to internet (80,8080) and when I access to server ther...

qus83 · 10-01-2018

Hi all we have problem regarding to traffic via mpls between 2 locations in main office we have core c3850 stack 192.168.1.1 access c3650 stack connected to servers, printers vlan 120 for servers , vlan 130 voice and the branch location cisco...

qus83 · 07-10-2024

I don't think it's an ACL ISSUE because it works fine with other PEs

qus83 · 07-10-2024

Did you have a chance to verify why udp traffic to port 646 does not make it in one direction?I did but no telnet

qus83 · 07-09-2024

the issue from one PE-A side , no ping without sourcebut the other side can ping without source ping mpls ipv4 x.x.x.x/32 source x.x.x.xWed Jul 10 09:39:08.606 ASTSending 5, 100-byte MPLS Echos to x.x.x.x/32,timeout is 2 seconds, send interval is 0 ...

qus83 · 07-09-2024

Thanks for the reply Also need to make sure TCP port 646 is allowed between the PEs for the targeted LDP sessionHow can we check tcp ? @Harold Ritter

qus83 · 12-06-2018

HiThanks for your reply If I want to access asdm from outside interface after the asa connect to Client's network and get the dhcp public ip address from ISP, please check the configuration if I miss something ?

Member Since	‎05-25-2018 12:38 AM
Date Last Visited	‎08-22-2024 12:20 AM
Posts	34
Total Helpful Votes Received	1

User Statistics

User Activity

Targeted ldp session issue in IOSXR

MPLS PACKET LOSS ISSUE BETWEEN (PE NCS5K ) AND (ACCESS ASR920)

ASDM not Working for cisco ASA5506-X

DNS SERVER IS INCORRECECT OR DOESN'T EXIST

Reduce broadcast traffic between 2 locations

Re: Targeted ldp session issue in IOSXR

Re: Targeted ldp session issue in IOSXR

Re: Targeted ldp session issue in IOSXR

Re: Targeted ldp session issue in IOSXR

Re: ASDM not Working for cisco ASA5506-X