Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Please feel free to correct me but as I understand policing on the current version of the pix."Policing is applied only in the output direction."So we can only police traffic which is leaving the pix. So in my secenario I have 150 vlans inside my pix...
Hi,I have a pix 515E UR with version 7.0.1 installed. I have had a situation with it that it will not boot and brings up this error:Total NICs found: 2mcwa i82559 Ethernet at irq 11 MAC: 0013.7fdd.xxxxmcwa i82559 Ethernet at irq 10 MAC: 0013.7fdd.x...
I have had a request is a pix firewall can do the following:There is a pix 515 with a dmz, there is a web server on the dmz.The client would like the web server to be accessible to connections from the internet and respond to them. However the would ...
I have a client who is has a requirement to run nat on their router and needs a backup interface to dial out if the the primary goes down.I have tryed this out in the lab and have got this configuration working.(NB, using all ethernet on this test ro...
I understand how the feasible successor is selected what I don't understand is why....Say you have 3 paths between A and BPath AD FD 1 20 302 30 403 200 210With all links up path 1 is the successor and path 2 is the feasible successor. No...
Hi,Your configuration is for the Version 1 vpn client. You should be using vpngroups to use the 4.6 clientTake a look at this exampleHow to Configure the Cisco VPN Client to PIX with AEShttp://www.cisco.com/en/US/products/sw/secursw/ps2308/products_c...
Sorry but I am at a loss, what do you mean port overlap???My orginal recommendation is the way that I have configured this on countless pix installs. It is the way you configure it on a pix!
The first option will not work you will get and error:ERROR: duplicate of existing staticThe second option would work successfully, However the best way is to just use the static pats I listed earlier. and do a clear xlate.
