Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm having a problem with one out of 12 new T1's. The longer it's up, the more input errors and CRCs it takes. After a shut/no shut it runs pretty clean for 8 to 12 hours. The next day I check it, it's taking many hundred errors per second, even w...
Could someone please tell me what I'm missing here. We've ordered a 50 user upgrade for our PIX 501. What I received was an email with a 6 digit 'Digital License Agreement Number'. How do I apply that to the PIX? I thought maybe the activation-ke...
The easiest way is to WRITE ERASE, reboot, then paste the backup file into a terminal program such as Hyperterminal through the serial port.Alternately, you can enter CONFIG mode, then use the CONFIG NET command. Note that you must be in CONFIG mode...
This problem site and all my other remote locations are CLOCK SOURCE LINE. My hub site has CLOCK SOURCE INTERNAL for all my T1s. My telco (SBC) emphatically claims they do not provide clocking on point-to-point T1s, and it's up to me to do so as I ...
Thanks for the response. Unfortunately at the online tool referenced, the Product Authorization Key (PAK) is apparently something other than the Digital License Agreement Number provided to me. I'll give licensing@cisco.com a try. thanks agai...
