Restore backup in pix515e

[rvenkat75]

Hi,

Is there any way we can restore pix backup taken through tftp.

[s.wilmes]

The easiest way is to WRITE ERASE, reboot, then paste the backup file into a terminal program such as Hyperterminal through the serial port.

Alternately, you can enter CONFIG mode, then use the CONFIG NET command. Note that you must be in CONFIG mode for this, not just priviledged exec mode.

good luck

[boondocker]

Do you know how to perform a restore from an tftp source using Cisco's ASDM?

[boondocker]

config net worked well using asdm command prompt.

Thanks!