Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I am wondering if anyone out there has a failover active/standby or active/active PIX (or ASA) pair which is also using 2 ISP connections with the route tracking option on.Any comments on if it is a successful config would be appreciated.Kelvin
Hi,I was wondering if anyone has tried implementing IPSec VPNs to a VLANed interface. I have 2 DSL connections each with only on static address. I want to pass them through a Cisco router, NAT them, and then forward the IPSec request to one of 2 Logi...
hi, i am having a little trouble figuring out a problem. I have an aironet 1121 AP and a 2970 switch. I have 4 vlans trunked over to the AP, I am getting to the AP without a problem as it is in guest mode. However I get no authenticaion.I have config...
Hi Guys, I have been looking at the use of Cisco ACS server for VLAN assignment. So far I have searched through a number of threads and no found what I am looking for specifically so here it goes.1) When the RADIUS attributes have been configured in ...
Hi guys thanks for the reply, I actually got a PIX in house this evening so I will be upgrading the PIX 7.0(4) to 7.1 and then simulating the environment here at my office. I will let you know what happens over the next day or so.Kelvin
Access Control Lists..I am thinking it is better to apply the ACLs at the closet (access) switches where I can specify the servers that should be reached by the hosts my test VLAN and deny those which they should not. I used a named extended ACL for...
Thanks for your reply.Ok, I was a little hurried before, I will try to be a little clearer.I have the hardware mentioned before, ACS 3.3 and a configured domain with AD running. I want to do 802.1x using AD for my user authentication. I have already...
