About vhamortebbed

vhamortebbed · 04-13-2005

When i replace the ATM interface card, am i going to lose the config for it?

vhamortebbed · 03-22-2005

I have a WLSE box. Do i configure snmp on the ap's back to the WLSE box or to anothe SNMP server?

vhamortebbed · 01-25-2005

Does anybody know the setting for the Config Registry for an AP1200?

vhamortebbed · 01-13-2005

I have access points that are reloading according to ciscoworks..the AP eventlog looks like this:Interface Dot11Radio0, Station 0060.1df0.4cdb Associated KEY_MGMT[NONEInterface Dot11Radio0, Deauthenticating Station 0060.1df0.6bbd Reason: Previous aut...

vhamortebbed · 12-21-2004

Can someone explain why this error keeps popping up, does the AP's need an upgrade?Firmware version policy violation ( 12.2(15)JA ), AP registered with an Unmanaged WDS 0.0.0.0

vhamortebbed · 01-26-2005

I have to check today. My problem is that i have over 100 AP's with not enough mem to hold the new image. CiscoWorks and WLSE don't overwrite it...What to do?

vhamortebbed · 01-25-2005

Thanks...now i have another problem,maybe you can help. I tried upgrading an AP through CiscoWorks when it failed. The AP is down, and found that there was not enough mem in flash..Do i have to upgrade the memory in the AP's?

vhamortebbed · 01-25-2005

What are some solution to a noisy RF environment?

vhamortebbed · 12-16-2004

That worked..thanks, but there is still 0 bytes free.736 bytes total (0 bytes free)Directory of nvram:/ 400 -rw- 3173 startup-config 401 ---- 47 private-config

vhamortebbed · 12-10-2004

Do i have to reset the switch after that?

Member Since	‎11-30-2004 10:41 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	12

User Statistics

User Activity

7206vxr ATM Module

AP1200 SNMP host

Registry setting for AP1200

1200 AP's are reloading

Cisco 1200 AP's

Re: Registry setting for AP1200

Re: Registry setting for AP1200

Re: 1200 AP's are reloading

Re: Error opening NVRAM

Re: Image not in BOOTVAR