Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I was into a telnet session with a 2950 when suddently the switch closed session and since then I am not able to connect to it by the ethernet. The switch is working ok and the devices connected to it are interchanging information, but I have the p...
when I get the switch by telnet and after entering the password the menu appears and there is no possibility of command line sentences ( how to backup the configuration in a tfpt server, for instance).Is there anybody who know how to go to the comman...
I am not able to copy the configuration file from 1900 to tfpt server because there is no option in the menu to go to the commnad line (K). when I log into the switch immediately the menu appears. Is there any option to save the confirguration to tft...
Connected by telnet and having loged in with enable rights I am not able to change the community strings public ( for read-only) and private (for read-write). The message I get is this:CIM_EGR_SW1>enablePassword:CIM_EGR_SW1#set snmp community read-o...
Thanks for your fast answer!. Do you know any product (free license) to manage this messages or traps comming from the switches?. My network have 18 switches and there is a workgroup of workstations connected.
Thanks for your reply. Here it is the configuration for the switch. I have a 193.148.197.0/24 (254 hosts) network.The current configuration, after some trials, is:CIM_EGR_SW1#sh running-confBuilding configuration...Current configuration : 1532 bytes!...
Hi! I wrote these instructions but don't work. This switch is connected to the other switches in the ethernet and have to be available to connect with http or telnet from anywhere inside the network and not only from one specific port.Thanks for your...
