Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
<p>Sorry for the newbie question but I'm just not sure what I need to do here. I have a PIX 515E running 8.04. I have an inside network 192.168.1.0/24 and a network on the DMX 192.168.100.0/30. the inside is security level 100; DMZ ...
I have a customer with a Cisco 3640 router and a 4 ATM interfaces network module running c3640-ik9s-mz.123-14.t3.bin IOS image. The 4 T-1 ATM module is fully boated with 4 T-1's and My problem is a follows:In the event that 1 of the 4 T-1s fails I s...
HELP!!! I have a customer with a Cisco 3640 router and an NM-4T1-IMA (currently 1 T-1). Every so often there connection to the WAN just dies and the router requires a reload to regain connectivity. Local routing is unaffected. This problem happens...
First a little about the topology. 1 3640 router x.x.x.x on an IMA card. This is the internet access T-1. x.x.x.x public IP on FE2/0 to PIX501 (NAT)and then on to the customers web server which ties back into the customer domain on the back end. A...
I have a 3640 running c3640-ik9s-mz.124-7.bin. I've implamented SSH as the only excepted transport on my vty's and apply ACL (access-class) to all the devices. Here is my problem. I seemingly can't utilize IOS WEBVPN's port-forward feature. I'm a...
A non XM 2610 with an IPPLUS IOS image should be able to run ITS or IOS Telephone Services. It isn't CCME but the priciples are the same. I ran ITS on my 2610. Good luck
The hardware configuration would look somewhat like this. First there would be two static ADSL services from the provider. The services would be of the same rates. The provider would provide two ADSL modem/routers. These devices would be configure...
