Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello! We have the following setup:Two 1700 routers with one WIC-ADSL interface in each connected to the same ISP; the two ADSL lines are separate.The ethernet interfaces are on the same VLAN as each other plus there is also the outside interface of...
Here's the scenario: I have 2 PIX firewalls at different sites connected to the internet with public IP addresses (PIX A and PIX B).There is a site-to-site permanent VPN between the two and there is clear separation of subnets between the two sites ...
Darn!! I was hoping you were going to prove me wrong on this; GLBP seems like an easy option...We have tried OSPF and balanced using source IP address however the links were not well balanced; even as bad as 80/20 sometimes.Looking through OER - you...
Paresh,I'm doing some research into GLBP and have seen the following:-----------------------------------GLBP Active Virtual GatewayMembers of a GLBP group elect one gateway to be the active virtual gateway (AVG) for that group. Other group members pr...
Hi Paresh,Thanks for the amazingly quick response! I notice you don't mention OER; is there a reason for that based on some previous experience?Thanks,Tariq.
I'm probably way off the mark here, but:1) Try creating a new local userid on the windows server itself, add it to the administrator group and try to log into ACS with it. On the ACS login page try using COMPUTERNAME\userid or just UserID.2) Try cre...
