Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a network configuration with two firewalls. ASA5510 is the first level of security and then Microsoft ISA is the next level of security before traffic enters the LAN. The problem I am faced with is that PPTP works inbound to the LAN but would ...
I upgraded my vpnclient from 4.6.04.004 to 5.0.01.0600 and now traffic is not passing between the ASA5510 and the PC. The same is happening between the PIX515e and the PC. The connection is establishing fine. It worked on the older vpnclient. What co...
I recently purchased the Catalyst Express 500. I want to use the POE to drive a LaserLink, but it wouldn't power the LaserLink up. The device requires pairs 1 (blue) to be +VCC and pairs 4 (brown) to be -VCC. However the 500 is not auto sensing this ...
HelloI have a 1841 integrated router as my firewall and I have pptp and gre ports open on my outbound traffic. But when I try to connect to a remote site using Windows Remote Desktop the session hangs before the login prompt. I permit any on both the...
Thanks for you quick response.I would make things alittle easiler if I can remove the NAT, but If I remove the NAT I can't browse. any ideas as to why? The firewall which is CheckPoint is already do NAT so I don't need to NAT again.In addition to my ...
