About mcnuttj

mcnuttj · 04-11-2023

Full bug title: CSCwd69454 - Port-channel interfaces of secondary unit are in waiting status after reloadDoes anyone know the show commands needed to confirm or refute that a given device has this problem?

mcnuttj · 05-05-2020

This could actually be a bug in the host, if the host is running ESXi:ESX Driver ProblemI have the same issue in my network on Nexus 9396PX switches, though FEXes are not involved. 2344-byte pings succeed. 2345-byte pings fail. But the host that's...

mcnuttj · 07-21-2024

Is this another AI bot?

mcnuttj · 07-01-2024

Confirmed. We upgraded some of our 93180s to 10.3.5 and the problem was resolved. We upgraded some of our 93180s to 10.4.3 and the problem persists there, but the workaround of adding "feature frequency-synchronization" and then removing it is stil...

mcnuttj · 06-13-2024

Hey, guys! Look! Another AI-generated comment! About as valuable as what you paid for it!

mcnuttj · 05-31-2024

That seemed to work for us as well on a C93180YC-FX3 running 10.4.3F. It will probably re-assert after a reboot, but it's a painless workaround for now.

mcnuttj · 05-28-2024

I am running a Nexus C93180YC-FX3 on 10.4(3) and the commands above had no effect.I see the receiver using "show gnss-receiver" but doing "shutdown" on it did not clear the red LED.

Member Since	‎06-14-2018 01:51 PM
Date Last Visited	‎10-09-2024 06:46 AM
Posts	17
Total Helpful Votes Received	8

User Statistics

User Activity

CSCwd69454 - Port-channel interfaces in waiting status after reload

CSCux01823 - DOC Control traffic Jumbo MTU > 2344 bytes pkts not going to HIF ports

Re: GNSS-LED always - bright red - at Cisco Nexus 93180YC-FX3 chassis

Re: GNSS-LED always - bright red - at Cisco Nexus 93180YC-FX3 chassis

Re: GNSS-LED always - bright red - at Cisco Nexus 93180YC-FX3 chassis

Re: GNSS-LED always - bright red - at Cisco Nexus 93180YC-FX3 chassis

Re: GNSS-LED always - bright red - at Cisco Nexus 93180YC-FX3 chassis