About Network @RKI

Network @RKI · 05-06-2024

Hi all,this ist a part of our switch port config on a C9300 with an IOSXE 17.9.X:+++interface GigabitEthernet1/0/7description RADIUS Portswitchport access vlan XYswitchport mode accessauthentication priority dot1x mab+++now due to some internal issue...

Network @RKI · 05-07-2024

Hi Dan,thanks a lot for the script. It worked Just one note: the second "set" in the line:set command "set authentication priority mab dot1x"is unnecessary. So it has to be: set command "authentication priority mab dot1x"Best regardsSaif

Member Since	‎06-20-2018 01:25 AM
Date Last Visited	‎05-08-2024 12:01 AM
Posts	2

User Statistics

User Activity

Using "IF" staement in TCL script to modify a switchport config

Re: Using "IF" staement in TCL script to modify a switchport