Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to setup WAAS between 2 sites. Site A with dual WAN routers and Site B with single WAN router. Site B will have 2 tunnels connecting back to Site A as per attached topology.
I'm facing some issues here whereby I'm not able to access appli...
I am having a Cisco Aironet 1702 AP. During initial testing, I have changed the operation mode from unified mode to autonomous mode by using command capwap ap autonomous. Now I would like to convert it to lightweight mode. I wonder if there is any co...
I have 2 units Cisco WLC 5508 running software version 7.0.220 with 70 over units Cisco AP 1262N and 1242AG. Some of wireless clients having problem to get the correct IP address from the DHCP server. There are 2 units of Microsoft DHCP. Both DHCP se...
We have UCS and Nexus 1000v running in our production. Due to some problem with the vCenter server, we need to re-install the vCenter server.Would like to know what should we do on the Nexus 1000v as re-installing the vCenter will cause the svs conne...
Hi Leo Laohoo, Due to time constraint for my testing, I have used the conventional way as per you reply in the post and converted the AP to lightweight mode. Please correct me if my understanding is wrong. All the new Cisco AP comes with universal IO...
Hi Amjad Abdullah, all clients have no issue because the issue happens randomly. Today this client is working but tomorrow might have problem. I'm not using any AP group. I have not do any sniffing on the DHCP server yet. Maybe will try that later. S...
Hi Osita Njokubi, I've tried configure DHCP on core switch and it's working fine. But I also tried the Microsoft DHCP server with wired/LAN users and it's working fine as well. It seems like integrating the wireless with Microsoft DHCP is having prob...
