About standrews

standrews · 01-11-2021

Hi Like the diagram, is it possible to only form OSPF nei C1 to Fish1 and C2 to Fish1, but not C1 to C2, if I use passive int it will disable the OSPF neighbor to Fish1 as well, if I use OSPF authentication it will still form the OSPF neighbor betwe...

standrews · 08-07-2019

Hi I have Cisco ASA 5506 and I used to be able to connect to the asa via asdm, always working, but today I was told to hardening the asa, so I disabled the TLS 1.0/1.1 only allow TLS1.2, see below command ssl server-version tlsv1.2ssl client-version...

standrews · 03-19-2019

Hi I am trying to use eigrp on the cisco asa, simple setup (see diagram below) the link between sw1 and sw2 is just trunk (allow all the vlans)the link between sw2 and ASA is a layer3 link 2 svi created on sw1 =======================================...

standrews · 03-14-2019

Hi I am trying to learn the vrf lite use eigrp, I have a very simple setup, just 2 routers (as show below) I can form eigrp neighbour if I put the network statement globally, but not between vrf, any help would be really help, thanks in advance ====...

standrews · 02-26-2019

Hi I am trying to configure transparent firewall see below diagram, simple setup 3 vlans and the svi is on the router, but when I trying to ping from the vpc1 to it's default gateway 192.168.1.1 and it just doesn't work, I can see the arp on the rou...

standrews · 01-11-2021

Thanks all Yes it's a layer 2 connection and all in the same vlan (subnet), and the switch port just access ports on default vlan1, as Richard mentioned I am not sure how you can use the loopback interface? the idea is C1 and C2 are customer sites an...

standrews · 03-25-2019

Thanks pappacrunchyes I can ping 192.168.2.1 from the ASA, as it's connected and on the same vlan.I have already tried to allow eigrp on the ASA, but that's not working, as you can see from the debug, the termination actually is sent from the sw1, I ...

standrews · 03-21-2019

any more suggestion? thanks

standrews · 03-20-2019

Hi Thanks llkin This is on the virtual environment EVE, I have tried to disable the igmp globally on sw2 and also on vlan 203, but that didn't make any difference, any other thoughts? thanks in advance

standrews · 03-19-2019

any thoughts guys? thanks

Member Since	‎06-24-2018 04:06 AM
Date Last Visited	‎01-13-2021 12:13 AM
Posts	14
Total Helpful Votes Received	5

User Statistics

User Activity

OSPF controll neighbour

Cisco ASDM TLS issue

eigrp on ASA

vrf lite eigrp

ASA transparent firewall with multiple vlans icmp

Re: OSPF controll neighbour

Re: eigrp on ASA

Re: eigrp on ASA

Re: eigrp on ASA

Re: eigrp on ASA