Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello. I recently added a Network Condition to my Device Admin Policy set. The idea is to only allow TACACS login from specific networks. This worked great, but now I cannot authenticate using Console (login authentication failed). I feel like I c...
Summary:
My L3 - Nexus 9k.
I'm trying to configure the subnet my SCCM server is on (to send magic packets to my remote subnets). Example - SCCM is on 10.0.0.1/24 (VLAN10) - SCCM server being 10.0.0.2
My remote Subnet is 192.168.0.1/24 (VLAN 192...
MHM - what would you recommend in regards to IPDT? I'm running into a similar issue. I'm running DHCP snooping + DAI and I'm having random Cisco phones go err-disabled (running default rates).%SW_DAI-4-PACKET_RATE_EXCEEDED: 18 packets received in 54...
I realize this is a super old thread, but it popped up in the google. I figured I might be able to help someone else. I'm currently on 7.2.0.1 and there is a check-box under network objects to "Show unused objects". Technically speaking (on older...
Hello Mike. aaa new-modelaaa group server radius ISEaaa group server tacacs+ ISE-TACACSaaa authentication password-prompt **TACACS-DOWN_NON-TACACS-PASSWORD**aaa authentication username-prompt **TACACS-DOWN_NON-TACACS-USERNAME**aaa authentication logi...
Hello Mike! aaa new-modelaaa group server radius ISEaaa group server tacacs+ ISE-TACACSaaa authentication password-prompt **TACACS-DOWN_NON-TACACS-PASSWORD**aaa authentication username-prompt **TACACS-DOWN_NON-TACACS-USERNAME**aaa authentication logi...
