jeansamarani
Level 1
Level 1
Member since ‎02-14-2005
‎08-18-2017

User Statistics

  • 58 Posts
  • 0 Solutions
  • 34 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
40 Discussion Posts
5 Discussion Posts
50 Discussion Posts
30 Replies
30 Discussion Posts
20 Discussion Posts
First Discussion
First Question
10 Discussion Posts
1 Reply

User Activity

Hi All, we have the following scenario. 2 Firewall Active/Standby are facing 2 routers configured with HSRP.is it possible in order to achieve LOAD Balancing for certain destination traffic to have 2 static routes having same AD but different next ho...
Hi All, I wanted just to check the impact of running 2 PIX 535 as Active/Standby with different Image 7.2.2 and 8.0.2I am getting only this warning:Any feedback is appreciated.Jean ************WARNING****WARNING****WARNING****************************...
Hi All, The below interface on the PIX 535 is having a lot of CRC and input errors. what can be the reason ? and how to solve it? let me know if any further information is required.Interface Ethernet1 "3PGW", is up, line protocol is up Hardware is i...
Hi All, we have a VPN service module that doesn't support AES 256 bits. is there a way to overcome this limitation by uploading a key? how can we do it if feasible?thanks Jean
Hi All, we have a 7609 chassis where we have installed the FWSM module and IPsec VPN module.we would like to configure a Site to Site VPN. how do we do that now ? Below is the VLAN interface configuration (outside)on the fwsminterface Vlan601 descri...
Community Statistics
Member Since ‎02-14-2005 02:55 AM
Date Last Visited ‎08-18-2017 03:53 AM
Posts 58