Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have two 2950 switches connected via fiber and I have set up a cluster. Every day or so I log into the web console to monitor the cluster and the second switch in the cluster shows switch down. I have to connect to the switch via console cable and ...
We now have a T1 line with 1721 router providing internet access. I have another cisco router inside the network that serves as a VPN router 3621. How can I forward VPN CLIENT 4.x through the 1721 and onto the VPN router 3621? Or is there a better wa...
I have two sites A and B connected by T1 line. Site A has another T1 line connecting A-C and Site B has another T1 line connecting B-C. I want to eliminate one of the T1 lines B-C so I need to route the B-C connection from B-A-C instead using the T1 ...
I have two locations connected by T1 with cisco router on each end. Each router has a connection to a dsl line from isp. One dsl line has failed and I need to set route to point internet traffic to the other router's dsl line across the T1 connection...
Yes the switch is responsive only via console cable and I can login via console and use the reload command to resolve the problem. Once the reload occurs, the switch will remain online for at most a couple of days and then I find it un-pingable and u...
I did a tracert and it goes to 185.2.1.3 and then 192.168.0.2 and the I get *. 192.168.0.2 is the serial interface for the T1 on router 2. Attached is the show ip route.Thank you.
