Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a point to point t-1 that is currently working for traffic betweeen 192.168.0.0 and 192.168.100.0 (remote site)I now neet to also route traffic from 192.168.51.0(remote site) and 192.158.50.0. The physical connection to this subnet is there an...
I have a new point to point t1 and am having trouble.I can ping from both routers (both 1800's) to the serial ip of the other but am not able to ping to the lan on the other side. A trace shows it going to the serial interface of the distant router a...
The ap's are getting power and are operating in stand alone mode (Autonomous). I have other ap's on cisco switches that the controller sees fine (Same network segment not vlans). All of the ap's are LAP1331AG Thanks for any help
I removed the static routes (thanks for that)Here are the sh ip results69.0.0.0/30 is subnetted, 1 subnetsR 69.146.238.216 [120/1] via 192.168.100.1, 00:00:28, FastEthernet0/0R 192.168.30.0/24 [120/2] via 192.168.254.1, 00:00:10, Serial0/0/0...
