Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
greetings to all,I have an 876 router with ISDN as a backup (in a dialer profile interface)I am facing the following issue. I try to configure 'dialer map' from interface dialer0 and the router doesnt support it, i.e. it doesnt have it as a command! ...
Hi,My current config is between 2 876 routers that connect with a GRE IPsec tunnel. I need to add a 3rd router in the setup and my question is the following:1. From inside the crypto map can I set a second peer or is it better to create a copy of my ...
Greetings,I currently have 2 876 routers with ISDN as a backup.When i passed CCNA back in 2003 i read that for chap authentication one needs to configure chap username and password of the peer router and then define dialer string in dialer interface...
Greetings,I have 2 876 routers which connect trough a GRE IPsec tunnel. Also the routers by default use the ISDN port as backup in case the DSL fails.I have 2 questionsa. If a add a 3rd site do i need to configure a separate GRE tunnel/crypto map etc...
Hello,I have configured a cisco 876 and WebVPN access from the internet. Up to now when i entered the https url on my browser i got the login prompt from the router and then the vpn client software was downoloaded to the pc (always win XP).I bought a...
greetings again,I am facing a serious issue. I try to configure dialer map from interface dialer0 and the router doesnt support it, i.e. it doesnt have it as a command.I can only configure them through bri interface but since i am using dialer profi...
Hi John,Question. I use the same crypto map name, i.e. SDM_CMAP_1 for my new router, correct?Also i create a new tunnel, i add an extra ip route for the new peer and i add a isakamp key for that peer, right? Anything else?many thanks,themis
greetings giuseppe and thanks for your really quick reply!So what you are saying is that i should define in global config mode the other 2 peers, leave the chap callin command in dialer and replace dialer string with dialer map info. Correct?Also, so...
Greetings and thanks gor your quick reply. I feel puzzled in 2 things.1.My current tunnel from central to site 1 is in subnet 10.0.0.X /255.255.255.252(i.e 10.0.0.1 and .2)Can the new tunnel for site 2 be 10.0.0.3-4 or a new subnet e.g. 11.0.0.1-2 is...
