Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have two Cisco PIX 501's (PIX1 and PIX2) providing a LAN to LAN IPSec VPN between two sites (SITE1 and SITE2). PIX1 is at SITE1 and PIX2 is at SITE2.If I ping a device on the LAN at SITE1 from a device on the LAN at SITE2, the VPN tunnel comes ...
Hi,I've got to install a 50 user license on our 10 user PIX 501 but I've stumbled at the first hurdle!!!The first thing the instructions say is go to "http://www.cisco.com/go/license" then follow the steps listed on the web page. Unfortunately that ...
Hi,Have a situation as follows:Office 110.0.0.x/24PIX inside = 10.0.0.254PIX outside = live IPOffice 2192.168.3.0/24PIX inside = 192.168.3.254PIX outside = live IPI want to have a LAN to LAN IPSec tunnel between Office 1 and Office 2, and also have t...
Hi,I'm familiar with configuring several, shall we say, "lesser" routers to ADSL lines. Our ISP normally provides 8 IP addresses, and the "lesser" routers are normally configured in "half bridged" mode (i.e. the router just passes any traffic destin...
Hi,I should have mentioned; the PIX's in question are running 6.3 and the private IP networks at each office are different (192.168.1.0/24 at SITE1 and 192.168.9.0/24 at SITE2).On this basis I'm not sure that the supplied link is specifically relevan...
Hi,Is it not possible to have live IP addresses on the LAN side of a 1701 then? Reason I ask it that I'll be hosting a PIX 501 behind the 1701, and I'm used to giving the outside of the PIX live addresses.Usually will have static commands from the l...
