Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I was writing a script to simplify the server managers stopping and starting services... also so they can check the status... if I do "! no echo" I can not get any output from commands I'd like to run with it... how can I get the output... without th...
Doing a traceroute from my cisco switch (happens with the pcs too) through an IPSec tunnel between a pix running 6.2 and 7.0.2 code... appears to scramble the response ip's.... I am getting non existant ip's for responses... does this sound like a b...
If I have a 6509 that I am routing with... and I have an ip on a vlan. 6 ports in the vlan. When it routes a packet through that vlan... does it forward the packet out all interfaces in that vlan??Here is where the question stems from. I have a 55...
It looks to me like trunking and pruning are 2 seperate things.... so I need to trunk some switch links... my supervisor would like me to use manual pruning as she read this was the preferred method.Does this mean... by default when I trunk my link a...
OK... I'm not entirely sure.... Are services being rotated around so much that you feel you need a process to identify 'dead' services?That sounds more like a policy problem....I don't have much experience writing the css scripts... this is really my...
Actually I am not seeing the pixes in the hop... what I am seeing is the router behind the pix after it gets through the tunnel... but the ip address that is being reflected is wrong!
the 256 vlan has a firewall with the .4 network behind it... the majority of traffic I see is stuff coming from that firewall.. from the .4 network... there is absolutely no return traffic !!!So it's all one way... I'm checking some of the stuff you ...
Interesting... I had the admin do a snoop from the server on port 10/12 and he see's only the broadcast and server traffic... so the p-cap is 'wrong' ?!?!?!
