Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I want to connect three separate locations with a 50MB fiber link. The equipment is 4506/L3, 3550/L3, 2621.I currently have them communicating on a common addresses of 192.168.101.2, .60 and .199. There are multiple VLANs at the first two locations.W...
I can not get the published application to work over a VPN browser connection. I believe I have installed the SSL certificate with the FDQN correctly.Can anyone assist me?Thanks,Lou
I am using VPN 3005 ver 4.7 and trying to connect to a Citrix metaframe XP. The initial screen comes up and I can open a folder to applications. When I try to initiate an application the application does not start.Any ideas?
I have two routers on separate subnets. Is it possible to create an HSRP group between them? The routers have one 10 Mb ethernet interface each. Are there other solutions?
I am looking for examples of VPN Concentrator configurations that provide access to Citrix and applications on the network. I have our intranet and e-mail access working. Any assistance will be appreciated.Lou Kirt
The information I received is that the certificate also needs to be installed on the client. Which seems counter productive to the idea of WebVPN. I have not tried it yet.Lou
Thank you for the suggestion. Most of the traffic will flow from the primary to the backup. The third site is our Internet access location. So the backup site will need to access it directly for best response.Lou
Here is a diagram I hope helps. The ip addresses 192.168.101.x are assigned at each location. I am open to suggestions on the best way to configure this arrangement.If you need more information let me knowThanks,Lou
Each location has separate distinct vlans. I want to pass traffic across the link to different vlans using EIGRP to manage the routing.For example: location A(vlan 10 / 192.168.10.17) to Location B (vlan 190 / 192.168.190.88)If this is not clear I c...
I have the "Enable Citrix Metaframe" under "WebVPN". However I am not familiar with the "port forward". Can you provide an example?Thanks for the assistance.Lou
