Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm testing with a C1111-8PW, one of the new ISR1100. I have found a large performance difference routing between WAN/LAN when using sub interface vs service-instance/BDI. This is with the same service-policy/access-group applied. It doesn't matter i...
So yes I ran into the same problem (I was running same controller code). It's about getting your WLC/AP software correct so the two can talk. If you refer to:
https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.h...
So downloading and installing the ap1g5-k9w8-tar.153-3.JG1.tar code to the internal AP has now converted it to a lightweight/CAPWAP AP. As soon as it rebooted it's got it's WLC details from the DHCP response and is trying to connect to the WLC. My WL...
Yes can log into the AP ok, here the show ver output
ROM: Bootstrap program is U-Boot boot loaderBOOTLDR: U-Boot boot loader Version 33
AP3890.A51C.9358 uptime is 28 days, 16 hours, 26 minutesLast reload time : Tue Dec 12 18:13:47 UTC 2017Last relo...
This guide is not useful at all. I've run into exactly the same problem as David has. I've got the same 8.5.1 code running on the AP. A 'show run' tells me the AP mode is "Local"
AP3890.A51C.9358#ap-type capwapCapwap process not ready yet. Try afte...
Cisco TAC have come back to me and explained that it's functioning as designed 'Bridging is an expensive feature for IOSXE as we have to create a software switch to forward the traffic.'
So to ensure you get the best performance from this router be...
