Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have been trying to get PBR to work on a 4500x running entservices for the last few days in my lab before deploying into production. However, I am having problems getting PBR to work on the SVIs; local PBR is working as desired on the core. I did h...
Okay here is the scenario. I have a ACS server that all network devices use TACACS through. Switches in zone 3 and zone 4 of the firewall use NAT to access the ACS server. The NAT address is the outside interface of the firewall. Switches in zone 3 a...
I have a camera that I know needs 25.5 Watts of power to work. This camera is connected to a 3750X switch with PoE+. However, only the layer 2 portion the camera comes up (Low power mode). When I look at the power inline, the switch is reporting 15.4...
A quick rundown on the problem. I had a user plug a switch into another switch configured with BPDU guard and the port shut down. They plugged their switch into another port also configured with BPDU guard and it let the switch connect. A little baff...
I am fairly new to the StackWise technology so this may be an easy question. I have a bunch of cisco stacks currently deployed, all 3750-X models with all their power slots filled; needless to say this is a waste of power and money so I want to enabl...
Bumping. I'm about to deploy another network with the similar architecture and need to get this problem figured out. I do remember that on the 3750X I had to modify the SDM template but was unable to find the same commands on the 4500X. Is there a wa...
Here is a screen capture of a ping test from PC#1 to Switch #1 and Switch #2 according to the firewall logs (Image 1). As you can see the source information and destinations are in the correct order along with the application. There was no output fro...
Well I was hoping to find a way to attach this rather than paste it but I don't see a way. Here is the config for the switches:
---------------------------
Core Switch
---------------------------
no service padservice timestamps debug datetime msec...
