Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi folks:First, let me state that I'm not a CISCO Hands on Expert. I am trying to architect what appears to be a means for dealing with a common scenario. I am in need of some assistance in helping guide me a bit.We have several small branch offices ...
Hi folks:I ordered a Catalyst Express 500 (WS-CE500-24LC) for a branch office we are putting in our 1st VOIP phones for. We'll have about 4 phones, 10-15 workstations. We've ordered a Split T1 (PRI 6 channels, Internet access 18). This will be an eth...
Hi Guys:I need some advice regarding getting some "eyes" onto the traffic on my WAN/LAN.We are mainly a 100% cisco shop. we just put in a Cisco 3750 as a layer 3 switch. This switch has links to many of our other switches (2900/3500) and routers (260...
My organization has several 2948 and 3550 series cisco switches with the standard IOS.I've been tasked with identifying a means of locking our network down so that only authorized NICs can get on the network.I've been told that TACSAS+ or VLANs can h...
Ok. I got a little further, but i'm not quite all there.i'm trying to aggragate gig0/1 and gig0/2 together. they are plugged into a NetGear GSM7324 24 port gig switch that supports 802.3ad (LACP).I went into the 2950, and issued the command:channel-g...
Hi Laurent:A previous Cisco COntractor set up the tunnel using a crypto map.I was trying to read up a little on using GRE, and we do have EIGRP setup on much of our private network.Our ASA-5510 with the IPS module is about six months old. we had a VA...
thanks, Edison. I'm grateful for the reply.I guess I got wrapped up in the marketing slicks of the catalyst express series as a perfect SMB / branch office product for our needs. I had worked with 2960's before and 3560's before and wanted to put in ...
Guys! Thank you!Brian, your idea about using #3 DUMMY Vlan might be a good idea. i wonder if this is like the guy i was talking to early about setting up a GUEST vlan. same concept i think. Maybe this wouldn't be too much of a hassle other than the f...
first, let me say i'm new to this (LACP, Etherchannel). i've never done this before.So i guess i'm saying, i'm kinda stupid and inexperienced to this particular issue.From what I know (little), I thought etherchannel was a cisco proprietary feature. ...
it's definitely a 2950.sorry for the mixup. so do i need to do antyhing to make sure it's working right?when i look at the port stats for gig0 and gig1, gig0 is definitely getting 99.9% of the traffic. gig2 does not have much traffic on it.
