Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
one of our site, customer observe that they have all the AP connections reset. Please find attached logs *Mar 1 00:00:04.525: soap_pci_subsys_init: slot 3 found radio*Mar 1 00:00:04.826: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to rese...
Aronet 1200 DHCP server is configured on Global Mode. Problem is it gives DHCP clients on Ethernet ( BVI) interface. Is there any way Access Point giving IP only on Dot11redio 0 iterface and not on ethernet side.
one thing I miss here ... AP got rebooted that time ... ap>sh verCisco Internetwork Operating System SoftwareIOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(13)JA3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/t...
Got the Answer myself.Access list was always a solutionaccess-list 101 deny tcp any any eq 546access-list 101 deny tcp any any eq 547access-list 101 deny tcp any any eq 67access-list 101 deny tcp any any eq 68access-list 101 deny tcp any an...
Thank you for replay, but the document still says you need to configure DHCP on global interface that means Access Point will broadcast all its quiries on all the interfaces.Is there any way ( By putting Access List or something ) Access Point will b...
CCNA !!! well CCNA does not have DSL questions, but it does not have too difficult questions. If you can configure 1720 and 827 you can get a feel of router and you can pass the exam. I passed the exam with simulators ( Not having router to work )
equal cost or unequal cost??simplest way is router eigrp 1 network x.x.x.x variance 2 traffic-share balancedYou can also usetraffic-share min across-interfaces min - is use to send traffic only across minimum cost path, it will ignore multiple pat...
