Re: What could have happen?? Refer Access Point Logs

nayanraut · ‎04-20-2005

one of our site, customer observe that they have all the AP connections reset. Please find attached logs

*Mar 1 00:00:04.525: soap_pci_subsys_init: slot 3 found radio

*Mar 1 00:00:04.826: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r

eset

*Mar 1 00:00:05.857: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio

0, changed state to down

*Mar 1 00:00:06.903: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to

up

*Mar 1 00:00:07.201: %SYS-5-CONFIG_I: Configured from memory by console

*Mar 1 00:00:07.201: %SYS-5-RESTART: System restarted --

Cisco Internetwork Operating System Software

IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(13)JA3, EARLY DEPLOYMENT RE

LEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Fri 20-Feb-04 17:21 by kellythw

*Mar 1 00:00:07.202: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a c

old start

*Mar 1 00:00:07.903: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern

et0, changed state to up

*Mar 1 00:00:08.148: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan

ged state to up

*Mar 1 00:00:10.339: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Do

t11Radio0, changed state to down

*Mar 1 00:00:16.357: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2452

selected

*Mar 1 00:00:16.377: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

*Mar 1 00:00:17.358: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio

0, changed state to up

*Mar 1 00:00:17.473: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 0090.4b7f

.6124 Associated KEY_MGMT[NONE]

nayanraut · ‎04-20-2005

one thing I miss here ... AP got rebooted that time ...

ap>sh ver

Cisco Internetwork Operating System Software

IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(13)JA3, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Compiled Fri 20-Feb-04 17:21 by kellythw

Image text-base: 0x00003000, data-base: 0x0053CEA4

ROM: Bootstrap program is C1200 boot loader

BOOTLDR: C1200 Boot Loader (C1200-BOOT-M) Version 12.2(8)JA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

ap uptime is 5 hours, 13 minutes

System returned to ROM by power-on

System image file is "flash:/c1200-k9w7-mx.122-13.JA3/c1200-k9w7-mx.122-13.JA3"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco AIR-AP1230B-A-K9 (PowerPC405GP) processor (revision B0) with 14326K/2048K bytes of memory.

Processor board ID FOC08122SVK

PowerPC405GP CPU at 196Mhz, revision number 0x0145

Last reset from power-on

Bridging software.

1 FastEthernet/IEEE 802.3 interface(s)

1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address: 00:0F:90:2A:3A:5A

Part Number : 73-8704-07

PCA Assembly Number : 800-23211-08

PCA Revision Number : A0

PCB Serial Number : FOC08122SVK

Top Assembly Part Number : 800-23304-07

Top Assembly Serial Number : FHK0814J25L

Top Revision Number : B0

Product/Model Number : AIR-AP1230B-A-K9

Configuration register is 0xF