About karthik_jce

karthik_jce · 08-01-2005

Hi,We have a 6000 series switch and it suddenly got rebooted. The show ver output is as follows: ------------------ show version ------------------ Cisco Internetwork Operating System SoftwareIOS (tm) s72033_rp Software (s72033_rp-PSV-M), Version 12....

karthik_jce · 08-01-2005

Hi please find the crash info file below.Regards,Karthik

karthik_jce · 07-25-2005

Hi Carl,The dialer interface is actually a virtual interface that gets binded to the Physical interface ( i.e the BRI / PRI interface ) All the other parameters, that control the operation of the ISDN are configured in this interface.The ISDN can be ...

karthik_jce · 07-20-2005

You can add another ip address range as a secondary address range.for example:interface f0/0ip address 192.168.0.1 255.255.255.252ip address 192.168.0.10 255.255.255.252 secondaryand also this range has to be added in the routing protocol.- Karthik

karthik_jce · 07-20-2005

Yes you need to give one of the port a static ip address and also that ip which has been assigned has to be excluded from the dhcp poolwith the command ip dhcp-excluded address - Karthik

karthik_jce · 07-20-2005

This shows that the remote site also has dialled out. Can you please post the condig also(both sides ). This would not affect the performance or the connectivity, but the billing would be for both the sites for each of the channels.- Karthik

Member Since	‎03-30-2005 02:10 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	7

User Statistics

User Activity

Switch reboot

Re: Switch reboot

Re: Dialler interface and Isdn interface

Re: Routing

Re: DHCP pool on 3550

Re: isdn:is one in and one out the same as both out